Server systems embraced the 2.5-inch drive form factor for high performance, lower power and more configuration density (drives per shelf). A single Lighting LB will replace many hard disk drives and still deliver the same or greater I/O performance with simultaneous multiple read/write transactions and transferring data via both (dual) ports.
The Lightning LB Enterprise Flash Drive is designed to the industry standard 2.5-inch drive form factor and has a Serial Attached SCSI (SAS) interface. The LB drive does not require changes to the existing software or hardware infrastructure. This makes integration into existing storage solutions, as well as enabling new optimized solutions seamless and simple for IT managers.
| Product Specifications | |
| Interface, Capacity, and Memory Technology | |
| Host Interface | SAS |
| Interface Ports | 2 (full duplex) |
| User Capacities | 150GB (LB 150S) |
| Sector Sizes Supported | 512, 520, or 528 bytes per sector |
| Flash Memory Technology | SLC NAND |
| Performance (Typical) | |
| Total IOPS | >120,000 IOPS |
| Data Throughput | Read > 420 MB/sec Write > 220 MB/sec |
| Physical Dimensions | |
| Height (max) | 15.0 mm |
| Width (max) | 69.85 mm |
| Length (max) | 100.45 mm |
| Weight | 0.2 Kg |
| Power Consuption | |
| Idle | 3.9 watts |
| Typical | 5.9 watts |
| Reliability | |
| No Write Cache | No risk of data loss |
| Read Endurance | Unlimited |
| Write Endurance | Unlimited |
| Unrecovered Error Rate | <1 sector in 1 E10-17 bits read |
| End-to-End Data Protection | Yes, including T10 DIF (SCSI PI) support |
| Patrol Read (automatic) | No performance impact |
| Power-on Hours | 8760 hours per year |
| MTBF | 2 million hours |
| Environment | |
| Operating Temperature (ambient) | 0 to 60° C |
| Non-operating Temperature | -40 to 85° C |
| Start-up time (Power On to Ready) | <30 seconds |
Product Information Download Center
